Conductivity Electrode with CAN bus, CANopen protocol LRG 16-41
The conductivity electrode LRG 16-41 consists of a TDS (= Total Dissolved Solids) monitoring electrode for conductivity measurement, a temperature sensor for detecting the fluid temperature and a conductivity transmitter that is fully integrated in the terminal box.
The conductivity electrode LRG 16-41 also uses the conductometric measurement principle but works with four electrodes. It monitors the electrical conductivity of electrically conductive fluids.
Together with the TDS controller LRR 1-40 and an operating device type URB or SPECTORcontrol the conductivity electrode LRG can be used as conductivity limiter and continuous blowdown controller in steam boilers and (pressurized) hot water plants or as conductivity meter in condensate and feedwater systems.
The conductivity electrode LRG 16-41 is designed for industrial boiler plants up to PN 40 and max. admissible conductivities of 8000 / 6000 μS/cm according to TRD/EN.
The data exchange between the conductivity electrode LRG, the control and operating equipment and other devices is effected by the CAN bus to ISO 11898, using the CANopen protocols.
The conductivity electrode LRG 16-41 consists of a TDS (= Total Dissolved Solids) monitoring electrode for conductivity measurement, a temperature sensor for detecting the fluid temperature and a conductivity transmitter that is fully integrated in the terminal box.
The conductivity electrode LRG 16-41 also uses the conductometric measurement principle but works with four electrodes. It monitors the electrical conductivity of electrically conductive fluids.
Together with the TDS controller LRR 1-40 and an operating device type URB or SPECTORcontrol the conductivity electrode LRG can be used as conductivity limiter and continuous blowdown controller in steam boilers and (pressurized) hot water plants or as conductivity meter in condensate and feedwater systems.
The conductivity electrode LRG 16-41 is designed for industrial boiler plants up to PN 40 and max. admissible conductivities of 8000 / 6000 μS/cm according to TRD/EN.
The data exchange between the conductivity electrode LRG, the control and operating equipment and other devices is effected by the CAN bus to ISO 11898, using the CANopen protocols.
